Purui Machinery specializes in R&D and production of ABS PC PP rigid material granulating machine manufacturers and suppliers.
1.Recycle both film and regrind material in one machine
Recycle both film and regrind material in one machine due to special design. Belt conveyer machine for feeding film, and Spiral charger and Feeder for regrind material.
2.High efficiency
Compared with the primary design, the output of PURUI second generation granulator machine has been increased 20%.
3.Low power consumption
The power consumption reduces 15% compared with the primary design.
Applicable plastic materials: PE, HDPE, LDPE, PP, BOPP, PET, PA, EPE, etc
Material shapes: film, bag, non woven fabric, (PE, PP) regrind
Material types: (rolls, loose, bundled),
Material comes from offcut, industry defective film and washed film.
Note: depending on different material properties, various downstream equipments are needed.
Feed film on the Belt conveyor machine and go into Compactor for cutting, heating, compacting and mixing, then enter the extruder for extruding.
Feed regrind material through the Spiral charger and Feeder on the extruder.
Instruction: the film and regrind material can be recycled separately or together, depending on customers’ different needs.
Normal:
Model | ML85 | ML100 | ML130 | ML160 | ML160-Ⅱ |
Output(kg/h) | 120-200 | 200-400 | 400-650 | 600-1000 | 800-1200 |
High output, low consumption:
Model | ML85B | ML100B | ML130B | ML160B | ML180B |
Output(kg/h) | 200-350 | 400-550 | 600-800 | 800-1200 | 1000-1500 |
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content.
Noodle Cutter Strand Type Cutting System
The length of the sink is 4 meters, which can be adjusted up and down, and the stainless steel pipe is designed to change water.
The sink is made of 2mm thick stainless steel plate.
Control Cabinet
Independent operation panel for easy operation, English version
With cooling fan inside
Temperature controller: Omron
Frequency inverter: Siemens
Self protective system:
Over current protective of motor
Over temperature protective of motor
Over pressure protective of screw
Low & over temperature control of extruder