Cutter Compactor Recycling Pelletizing Line
Cutter Compactor Recycling Pelletizing Line

Cutter Compactor Recycling Pelletizing Line

Purui Machinery specializes in R&D and production of cutter compactor recycling pelletizing line manufacturers and suppliers.

Cutter Compactor Recycling Pelletizing Line Description:

Cutter compactor recycling pelletizing line from Purui Machinery is designed for recycling plastic PP, PE, HDPE, LDPE, LLDPE, PA66, PC, PET, OPP, BOPET, ABS and etc. which are widely used in making bags, film rollers, stretch film, shrink film, muti-layer film, T-shirt bag cut-offs; Foamed PE, sheet, food container, fruit net, cover, fiber, raffia, silk, yarn, woven bag, jumbo bag. Cutter compactor recycling pelletizing machine can produce more than 10 kinds of plastic material.

Cutter Compactor Recycling Pelletizing Line

Cutter Compactor Recycling Pelletizing Machine Technical Parameter:

Model ML85 ML100 ML130 ML160 ML180
Screw diameter(mm) 85 100 130 160 180
L/D 25-42 25-42 25-36 25-33 25-33
Output(kg/hr) 120-180 200-350 400-550 600-800 800-1000

 

Cutter Compactor Recycling Pelletizing Machine Detail:

  • Belt Conveyor
    As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.

  • Compactor / Agglomerator
    The rotatory blades of compactor will cut up incoming scraps. Frictional heating which caused by high speed rotatory blades will heat and let scraps shrinking just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushes, dries and compacts the material which enables a fast and stable feeding from the compactor directly into the extruder.

  • Extruder
    A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content.

  • Water-ring Die-face cutting system
    Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.

  • Vibration drying system
    Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible

    Pellets Sample

    Packaging Shipping