HDPE film granulating system integrates crushing, compaction and granulation, with high automation and labor saving.
HDPE film granulating system integrates crushing, compaction and granulation, with high automation and labor saving. The plastic granulator is suitable for recycling and granulating PP non-woven fabrics, diapers, melt blown fabrics, leftover materials of protective clothing, etc.
For PP non-woven fabrics with a wider range of applications, it realizes high-speed and efficient recovery, adapts to large melt index range span, small particle color deviation, melt index characteristics, good stability, and realizes real online recovery. The plastic pelletizing equipment solves the problem of broken fiber in the spinning of non-woven fabric after pelletizing, saves costs for the PP non-woven fabric industry, and adds new profit growth points.
1. After the membrane is cleaned, it does not need to be dehydrated. It can be directly granulated, saving labor
2. HDPE film granulating system special screw structure, with electromagnetic heating, stable performance
3. Single machine, water ring hot cutting, lateral eyeing system, etc. can be configured according to customer needs
Plastic → Belt Conveyor → Metal Detector (Optional) → Compactor / Compactor → Extrusion → Hydraulic Screen Change → Die Head → Cooling Water Tank → Centrifugal Dehydrator / Dewatering Vibrating Screen → Dewatering Fan → Storage Silo
Normal:
| Model | ML85 | ML100 | ML130 | ML160 | ML160-Ⅱ |
| Output(kg/h) | 120-200 | 200-400 | 400-650 | 600-1000 | 800-1200 |
High output, low consumption:
| Model | ML85B | ML100B | ML130B | ML160B | ML180B |
| Output(kg/h) | 200-350 | 400-550 | 600-800 | 800-1200 | 1000-1500 |
Vibration drying system
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption
Water-ring Die-face cutting system
Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.
Compactor / Agglomerator
The rotatory blades of compactor will cut up incoming scraps. Frictional heating which caused by high speed rotatory blades will heat and let scraps shrinking just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushes, dries and compacts the material which enables a fast and stable feeding from the compactor directly into the extruder.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content.
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
