The film granulator machine has good plasticizing and exhausting effects, convenient and simple operation, high productivity, and beautiful plastic particles.
HDPE film granulator machine is suitable for granulation of recycled PE PP films, packaging bags, etc. Mainly used for cleaning and crushing waste plastics (PP/PE films, woven bags, non-woven fabrics, etc.) and clean industrial waste granulation; the production line has novel design, reasonable structure, stable operation, low noise and low energy consumption and high output. The film granulator machine has good plasticizing and exhausting effects, convenient and simple operation, high productivity, and beautiful plastic particles.
HDPE film granulator machine is mainly suitable for the recycling and granulation of waste plastics with a correspondingly larger moisture content. The main engine adopts an exhaust and drainage screw barrel. The material can be directly granulated after powder cleaning. The screen changer can be manually electric or hydraulic. A variety of screen changing devices are available for customers to choose, and the output can range from 150 to 500 kg/h. It integrates advanced nature, reliability and practicability, and provides a strong guarantee for users to produce high-quality plastic pellets.
Plastic → Belt Conveyor → Metal Detector (Optional) → Compactor / Compactor → Extrusion → Hydraulic Screen Change → Die Head → Cooling Water Tank → Centrifugal Dehydrator / Dewatering Vibrating Screen → Dewatering Fan → Storage Silo
Normal:
Model | ML85 | ML100 | ML130 | ML160 | ML160-Ⅱ |
Output(kg/h) | 120-200 | 200-400 | 400-650 | 600-1000 | 800-1200 |
High output, low consumption:
Model | ML85B | ML100B | ML130B | ML160B | ML180B |
Output(kg/h) | 200-350 | 400-550 | 600-800 | 800-1200 | 1000-1500 |
Vibration drying system
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content.
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Water-ring Die-face cutting system
Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.
Compactor / Agglomerator
The rotatory blades of compactor will cut up incoming scraps. Frictional heating which caused by high speed rotatory blades will heat and let scraps shrinking just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushes, dries and compacts the material which enables a fast and stable feeding from the compactor directly into the extruder.