LDPE film granulation machine suitable for HDPE pipeline material, blue barrel material, machine oil can, shampoo bottle, milk bottle broken material recycling granulation, large output, high efficiency, full and solid particles.
LDPE film granulation machine suitable for HDPE pipeline material, blue barrel material, machine oil can, shampoo bottle, milk bottle broken material recycling granulation, large output, high efficiency, full and solid particles. (HDPE small hollow, hollow, large hollow and other crushing materials).
This unit is used for recycling, extruding and granulating various plastic films, sheets, chemical fibers and non-woven fabrics.The pelletizing method of this unit is that the plastic is extruded in the melt state and scraped off by the blade and then cooled and solidified by circulating cold cutting water. Simple operation, high degree of automation, no dust, low noise, good slicing quality and beautiful appearance.
1. LDPE film granulation machine can adopt the corresponding special screw design and different configurations according to the different needs of users. It is widely used in the production of plastic mixed color granulation and nozzle recycling granulation. High torque, hard tooth surface reducer to ensure stable operation and no noise. The special hardened surface treatment of screw and screw barrel has good mixing performance and wear resistance.
2. The special exhaust type design can effectively remove water vapor and waste gas, make the discharged colloidal particles more stable and firm, and ensure the excellent performance of the colloidal particles.
3. The use of frequency conversion control can save more than 20% of electricity consumption.
Plastic → Belt Conveyor → Metal Detector (Optional) → Compactor / Compactor → Extrusion → Hydraulic Screen Change → Die Head → Cooling Water Tank → Centrifugal Dehydrator / Dewatering Vibrating Screen → Dewatering Fan → Storage Silo
Normal:
Model | ML85 | ML100 | ML130 | ML160 | ML160-Ⅱ |
Output(kg/h) | 120-200 | 200-400 | 400-650 | 600-1000 | 800-1200 |
High output, low consumption:
Model | ML85B | ML100B | ML130B | ML160B | ML180B |
Output(kg/h) | 200-350 | 400-550 | 600-800 | 800-1200 | 1000-1500 |
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Water-ring Die-face cutting system
Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.
Vibration drying system
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption