LDPE film granulator machine is used for waste plastic films (industrial packaging films, agricultural films, packaging bags, etc.), woven bags, agricultural convenience bags, PP fibers, PP non-woven fabrics, etc.
LDPE film granulator machine is used for waste plastic films (industrial packaging films, agricultural films, packaging bags, etc.), woven bags, agricultural convenience bags, PP fibers, PP non-woven fabrics, etc.
The PP PE film is conveyed to the compactor by a belt conveyor. The material is then cut, then forced into the extruder, pelletized, water tank, dehydrator, and finally blown into the storage hopper.Compared with the traditional strip granulation method, the water ring granulation cuts the granules of uniform size and does not need to change the screen. The problem of broken bars, the equipment occupies less space and other advantages.
1. LDPE film granulator machine has a high degree of automation, as long as someone in the front adds waste plastic, and someone in the back receives the finished pellets, which realizes the direct transformation from waste plastics to pellets;
2. The entire production line is continuously improved on the basis of German equipment drawings, with reasonable design, beautiful appearance, durable, and the parts in contact with materials are made of stainless steel.
3. The particles produced are of high quality, without bubbles, and are plump and round.
4. The particles produced are beautiful in appearance, cylindrical in shape, and adjustable in size and thickness.
5. The forced feeding device, host and pelletizer of the pelletizing line are all controlled by frequency converters.
Plastic → Belt Conveyor → Metal Detector (Optional) → Compactor / Compactor → Extrusion → Hydraulic Screen Change → Die Head → Cooling Water Tank → Centrifugal Dehydrator / Dewatering Vibrating Screen → Dewatering Fan → Storage Silo
Normal:
| Model | ML85 | ML100 | ML130 | ML160 | ML160-Ⅱ |
| Output(kg/h) | 120-200 | 200-400 | 400-650 | 600-1000 | 800-1200 |
High output, low consumption:
| Model | ML85B | ML100B | ML130B | ML160B | ML180B |
| Output(kg/h) | 200-350 | 400-550 | 600-800 | 800-1200 | 1000-1500 |
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Water-ring Die-face cutting system
Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.
Vibration drying system
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption
