Noodle type pelletizing line is special equipment or the PET bottle / PET film / non-woven recycling and pelletizing.
Noodle type pelletizing line is special equipment or the PET bottle / PET film / non-woven recycling and pelletizing. With compacting machine, could pre-compact the thin material into the small granule, making the automatic feeding material easier, and it efficiency improves the production. Cylinder type hydraulic changer with vacuum gas exhausting enables the non-stop changiing filter and no leaking material. Pelletizing by noodle type improves the pelletizing quality.
1. Noodle type pelletizing machine can be customized according to customer requirements.
2. Finished plastic pellets must be of uniform size. The pellets with high quality are more favorable for reusing in all kinds of extruders and injectors.
3. Two positions hydraulic screen changers keep the machine operating nonstop even when replacing the filter screen.
Conveying feeding→metal detector → parallel twin screw extruder → bipolar vacuum exhaust system → hydralic screen exchanger → material outing mould → water tank → drying system → cutting granulating unit → storage hopper
Normal:
| Model | SJ45 | SJ65 | SJ90 | SJ100 | SJ120 |
| Output(kg/h) | 10-60 | 100-150 | 180-250 | 250-350 | 300-600 |
High output,low consumption:
| Model | SJ150 | SJ160 | SJ180 | SJ200 |
| Output(kg/h) | 400-700 | 600-1000 | 1500-2000 | 2000-3000 |
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content
Compactor / Agglomerator
The rotatory blades of compactor will cut up incoming scraps. Frictional heating which caused by high speed rotatory blades will heat and let scraps shrinking just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushes, dries and compacts the material which enables a fast and stable feeding from the compactor directly into the extruder.
Noodle Cutter Strand Type Cutting System
The length of the sink is 4 meters, which can be adjusted up and down, and the stainless steel pipe is designed to change water.
The sink is made of 2mm thick stainless steel plate.
Click to watch the complete HD video of the noodle type pelletizing line
