The PE film pelletizer machine is installed in “line” shape, “L” shape and “T” shape, which saves working space.Simple process, advanced technology, automatic temperature control, national energy-saving patented heater, low power consumption, no pollution, high degree of automation.
The PE film pelletizer machine is installed in “line” shape, “L” shape and “T” shape, which saves working space. This film pelletizer machine is different from waste plastic machines such as PP, PE, HDPE. In particular, solves the problem of high-density polyethylene granulation and broken strips.Simple process, advanced technology, automatic temperature control, national energy-saving patented heater, low power consumption, no pollution, high degree of automation.
Bottle flakes → conveying and feeding → magnetic screening → forced feeding → vented single-screw extruder → hydraulic screen changer → discharge mold → vented single-screw extruder → hydraulic screen changer → discharge mold → Water tank → drying system → pelletizer → storage hopper
The film pelletizer machine is mainly used for the granulation of cleaned PP and PE plastic films. It is a fully automatic water ring granulation production line. The film pelletizer machine particles produced are beautiful in appearance, full, uniform and without pores. Waste plastic recycling granulation equipment.Film pelletizer machine is mainly composed of forced feeding system, single screw extruder, non-stop hydraulic screen changing device, die head, water ring pelletizer, vibrating screen, centrifugal dehydrator, cyclone silo, control panel, etc. .
Normal:
Model | SJ45 | SJ65 | SJ90 | SJ100 | SJ120 |
Output(kg/h) | 10-60 | 100-150 | 180-250 | 250-350 | 300-600 |
High output,low consumption:
Model | SJ150 | SJ160 | SJ180 | SJ200 |
Output(kg/h) | 400-700 | 600-1000 | 1500-2000 | 2000-3000 |
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content
Water-ring Die-face cutting system
Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.
Vibration drying system
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption