PET chemical fibers pelletizing line is an ideal equipment for recycling plastic pelletizing, suitable for waste fabrics, nylon fibers, non-woven fabrics, melt blown fabrics, etc.
PET chemical fibers pelletizing line is an ideal equipment for recycling plastic pelletizing, suitable for waste fabrics, nylon fibers, non-woven fabrics, melt blown fabrics, etc. PET chemical fibers pelletizing machine has the advantages of novel design, reasonable structure, stable operation, low noise, low energy consumption and high output.
Purui Machinery accurately plans and assembles a variety of equipment according to the production needs of customers, and provides a series of high-yield, high-efficiency plastic pelletizing line solutions. All plastic chemical fibers pelletizing line will be assembled into production lines before they leave the factory and tested under simulating actual use conditions to ensure the production line’s capacity and product quality.
1. The high-efficiency forced feeding system ensures high feeding rate and low energy consumption rate.
2. The specially designed barrel and screw, as well as the exhaust system, can ensure high output.
3. The PET chemical fibers pelletizing machine uses a specially designed noodle cutter strand type cutting system.
Normal:
Model | SJ45 | SJ65 | SJ90 | SJ100 | SJ120 |
Output(kg/h) | 10-60 | 100-150 | 180-250 | 250-350 | 300-600 |
High output,low consumption:
Model | SJ150 | SJ160 | SJ180 | SJ200 |
Output(kg/h) | 400-700 | 600-1000 | 1500-2000 | 2000-3000 |
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content
Compactor / Agglomerator
The rotatory blades of compactor will cut up incoming scraps. Frictional heating which caused by high speed rotatory blades will heat and let scraps shrinking just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushes, dries and compacts the material which enables a fast and stable feeding from the compactor directly into the extruder.
Noodle Cutter Strand Type Cutting System
The length of the sink is 4 meters, which can be adjusted up and down, and the stainless steel pipe is designed to change water.
The sink is made of 2mm thick stainless steel plate.
Click to watch the complete HD video of the PET chemical fibers pelletizing line