PET fabric granulating extruder machine is used for recycling and waste plastic materials. PET fabric granulating machine is equipped with automatic temperature, electric change filter screen.
PET fabric granulating extruder machine is used for recycling and waste plastic materials. PET fabric granulating machine is equipped with automatic temperature, electric change filter screen. After loading the feeder, the crushed material can be granulated. PET fabric granulating machine adopts speed regulating motor.Material can be cut according to the feed rate of the extruder.
After loading the material to compactor, The material will shrink, crush in compactor,feed to extruder. The cutting method can be die face cutting system and strap cutting system.
PET fabric granulating machine has the characteristics of good heat resistance, low moisture absorption, good chemical resistance, good weather resistance,high dielectric strength, good electrical properties, high dielectric strength and dimensional stability.
The Annual output of our granulating line are 90 sets. Purui Machinery exported high quality machines to customers from various countries at the passed years, such as germany, american, holand, sweden, canada, saudi arabia, egypt, malaysia, indonesia, thailand, india etc.
Normal:
Model | SJ45 | SJ65 | SJ90 | SJ100 | SJ120 |
Output(kg/h) | 10-60 | 100-150 | 180-250 | 250-350 | 300-600 |
High output,low consumption:
Model | SJ150 | SJ160 | SJ180 | SJ200 |
Output(kg/h) | 400-700 | 600-1000 | 1500-2000 | 2000-3000 |
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content
Noodle Cutter Strand Type Cutting System
The length of the sink is 4 meters, which can be adjusted up and down, and the stainless steel pipe is designed to change water.
The sink is made of 2mm thick stainless steel plate.
Control Cabinet
Independent operation panel for easy operation, English version
With cooling fan inside
Temperature controller: Omron
Frequency inverter: Siemens
Self protective system:
Over current protective of motor
Over temperature protective of motor
Over pressure protective of screw
Low & over temperature control of extruder
Click to watch the complete HD video of the PET fabric granulating extruder machine