Plastic bottle flake granulating line is applied in PET waste flakes pelletizing field.
Plastic bottle flake granulating line is applied in PET waste flakes pelletizing field. Through extrusion, cutting and dry process, the waste bottle will become to be pellets. The pellets are widely used in plastic industry, like sheet, and profile production.
From feeding system to final products, we can design and work out a complete system to satisfy all of your production requirements. We will provide you with a pelletizing system in good quality and price as per your requirements.
Plastic bottle flake granulating line is mainly used in PET, PVC and other high viscosity materials.
The machine can reduce less loss of the viscosity of the raw material. Compared to water-ring cutting, it is not easy to break the article or adhesion. The granules that the Braces particle cutting machine produce are much more uniform and beautiful.
Feeding machine can be used with all kinds of extruders. It can carry plastic are cleaned into the hopper of Extrude. automatic.It can save your labour,ande realize the effect of safety and reliability.
Extruder is used to extrude plastic cleaned by high temperature.The extrusion line can be consisted by such accessory machine: main motor, the gear box, the distribution box, the barrel and screw, the dies, vacuum calibration tank. Main Motor is mainly to supply the power. The Gear box transfers the motor to power.The distribution box enlarges the strength of the power and realizes uniformity.Double screws can make low viscosity index consume of raw material and improve production.It also has a Cooling tank making the heat of screw be appropriate.
We use plug board type to change nets and keep machine working.The mould is made by 40Cr nitridation .The pressure sensor prompts to change the nets.There also can install a hydraulic equipment to change the nets more quickly.
| Model | CT110 | CT130 | CT160 | CT180 |
| Output(kg/h) | 500-600 | 800-900 | 1000-1500 | 1800-2000 |
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content.
Strand Cutting System
PET Strips will be flow smoothly in the water without worring interrupt.
Underwater Cutting System
The strips will be automatically granulated/cut without manual pulling even if the trips breakoff during the process. The frame material is made anti-corrosion and wear-resistant material and the part contact with material is made of 304 stainless steel.
Click to watch the complete HD video of the plastic bottle flake granulating line.
