plastic bottle flake granulator equipment
plastic bottle flake granulator equipment

Plastic Bottle Flake Granulator Equipment

Plastic bottle flake granulator equipment is special equipment for the PET film recycling granulating.

Plastic Bottle Flake Granulator Equipment:

Plastic bottle flake granulator equipment is special equipment for the PET film recycling granulating. Plastic recycling granulator machine equipped with comacting machine which cound pre-compact the film into smaller granules, then easily feed intoscrew barrel of extruder. Its efficiency is high and can improve production capacity and save labour cost.

plastic bottle flake granulator equipment

It has two vacuum exhuasting mouth on extruder barrel which can fully vent the moisture in the material and hence the final granule quality will be very perfect.

At the end of screw barrel, recycling pelletizing machinery equipped with double post fast speed hydraulic non -stop screen changer which can effetively filt out the dirty in the plastic melt.

The pelletizing adopts water flush pelletizing which is easier to operate, and the shape and appearance of granule is good.

This equipment can be used with all kinds of extruders. The bottle flake granulator can carry plastic are cleaned into the hopper of Extrude. automatic. The bottle flake granulator can save your labour, and realize the effect of safety and reliability.

Purui Machinery adopts the plug-in type screen changer to keep the granulator working normally.The mould is made by 40Cr nitridation. The pressure sensor prompts to change the nets.There also can install a hydraulic equipment to change the nets more quickly.

Plastic Bottle  Granulator Equipment Application:

plastic bottle flake granulator equipment

Bottle Flake Granulator Technical Parameter:

TSSK series co-rotating twin-screw extruder(normal)

Model TSSK-50 TSSK-65 TSSK-72 TSSK-92
Screw diameter(mm) 50.5 62.4 71.2 91
Mainmotor power(kw) 37 55 110 250
Capacity(kg/h) 80-120 200-250 300-400 500-800

TSSK series co-rotating twin-screw extruder(high torque)

Model 50B 65B 75B 75D
Screw diameter(mm) 50.5 62.4 71.2 71.2
Rotary speed(rpm) 500/600 500/600 500/600 500/600
Mainmotor power(kw) 55/75 90/110 132/160 200/250
L/D 28-48 28-48 28-48 28-48
Capacity(kg/h) 120-280 180-400 250-650 500-1200

Plastic Bottle  Granulator Equipment Detail:

  • Extruder
    A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content.

  • Noodle Cutter Strand Type Cutting System
    The length of the sink is 4 meters, which can be adjusted up and down, and the stainless steel pipe is designed to change water.
    The sink is made of 2mm thick stainless steel plate.

  • Vibration Drying System
    Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption.

Click to watch the complete HD video of the plastic bottle flake granulator equipment

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible

    Pellets Sample

    Plastic Bottle Flake Granulator Equipment

    Packaging Shipping

    Plastic Bottle Flake Granulator Equipment

    Please Enter Your Message