Plastic bottle flake pelletizer equipment can be used in the process of various plastic granulation particles, which can be used for PET and other plastics to granulate.
For several characteristics and advantages of granulator, it is particularly remarkable in the following places:
1) The screw part is carefully developed and designed, the whole machine and each part are equipped reasonably, and all the lines are heated by three fires and one zero.
2) The screw is designed according to the characteristics of the material, so the granulator has high efficiency and speed, the products produced have strong gloss, the particle size is full, the configuration of the whole machine is increased, and the service life of the equipment is added. In the appearance aspect has also carried on the rationalization design, therefore has the unique aesthetic feeling.
3) This granulator adopts reasonable design, the production volume has also been greatly improved, the finished product performance-price ratio is higher, the maintenance time is reduced, so the maintenance cost of users is also reduced.
4) The characteristics of high output and low energy consumption are equipped with large torque reducer and motor, and the screw is specially designed and processed. No dead angle, no iron jam, effectively improve the production capacity, enhance the plastic plastic effect. Equipped with single exhaust double exhaust structure, full drainage, exhaust, so that the particles are more strong and full.
5) High quality electrical and driving equipment to make the granulator more safe and reliable in the process of use.
Plastic flake pelletizer equipment is used to recycle the PET plastic soft materials such as bags, films, scraps etc, it can mix and dry the plastic materials and recycle the plastic materials into small powder pellets.
TSSK series co-rotating twin-screw extruder(normal)
Model | TSSK-50 | TSSK-65 | TSSK-72 | TSSK-92 |
Screw diameter(mm) | 50.5 | 62.4 | 71.2 | 91 |
Mainmotor power(kw) | 37 | 55 | 110 | 250 |
Capacity(kg/h) | 80-120 | 200-250 | 300-400 | 500-800 |
TSSK series co-rotating twin-screw extruder(high torque)
Model | 50B | 65B | 75B | 75D |
Screw diameter(mm) | 50.5 | 62.4 | 71.2 | 71.2 |
Rotary speed(rpm) | 500/600 | 500/600 | 500/600 | 500/600 |
Mainmotor power(kw) | 55/75 | 90/110 | 132/160 | 200/250 |
L/D | 28-48 | 28-48 | 28-48 | 28-48 |
Capacity(kg/h) | 120-280 | 180-400 | 250-650 | 500-1200 |
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content.
Noodle Cutter Strand Type Cutting System
The length of the sink is 4 meters, which can be adjusted up and down, and the stainless steel pipe is designed to change water.
The sink is made of 2mm thick stainless steel plate.
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption.
Click to watch the complete HD video of the plastic bottle flake pelletizer equipment.