Plastic Bottles Granulating Line
Plastic Bottles Granulating Line
Plastic Bottles Granulating Line
Plastic Bottles Granulating Line
Plastic Bottles Granulating Line
Plastic Bottles Granulating Line

Plastic Bottles Granulating Line for Bucket, Small Hollow Bottles, Milk Bottles

The plastic bottles granulating line is suitable for HDPE thermoplastics, pelletizing method:strand type, water ring die cutting type, air cooling die cutting type.

Plastic Bottles Granulating Line Description:

The plastic bottles granulating line is suitable for HDPE thermoplastics such as plastic bucket / small hollow bottles / milk bottles. The plastic granulating machine’s pelletizing method: strand type, water ring die cutting type, air cooling die cutting type.

Plastic Bottles Granulating Line

Plastic Bottles Granulating Machine Application:

Plastic Bottles Granulating Line

 

Plastic Bottles Granulating Machine Technical Parameter:

Model SJ100 SJ120 SJ140 SJ150 SJ160 SJ180 SJ200
Screw diameter(mm) 100 120 140 150 160 180 200
L/D 18-42 18-42 18-42 18-42 18-42 18-42 18-42
Rotary speed(r/min) 10-150 10-150 10-150 10-150 10-150 10-150 10-150
Output(kg/h) 250-350 300-400 500-600 600-800 800-1000 900-1200 1000-1500

Note: plastic bottles granulating machines are customized product, any changes in material and motor configuration will affect the output capacity data. Please consult our sales quotation for guidance.

Plastic Bottles Granulating Machine Detail:

  • Belt Conveyor
    As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.

  • Extruder
    A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content.

  • Water-ring Die-face cutting system
    Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.

  • Vibration drying system
    Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption

  • Electric control system
    One button “START”,One button “STOP”, lEmergency Stop. lProtection switch. Every operation position and rotary parts are equipped with limit switches for safety protection. lPrecise temperature control, optimized plasticization design, ensure reliable quality of granules. lProtection from over-heat in the compactor.

Pellets Sample

Plastic Bottles Granulating Line

Packaging Shipping

Plastic Bottles Granulating Line

Click to watch the complete HD video of the bucket / small hollow bottles / milk bottles granulating line

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible

    Please Enter Your Message