This plastic film granulating system has the characteristics of three types of equipment: crushing, extrusion and granulation.
This plastic film granulating system has the characteristics of three types of equipment: crushing, extrusion and granulation. When recycling soft plastics (ie films, woven bags, packaging bags), it does not need to be crushed separately and can be recycled and granulated directly. The plastic film granulating machine is equipped with a fully automatic control cabinet and PLC operating system, which is easy to operate and stable in performance. The plastic film granulating machine has low energy consumption, significant energy saving effect, high output, and electromechanical integration.
This plastic film granulating machine adopts water ring granulation, the cut granules are smooth and full, and the granulation is clean, without pollution and aging, and can be adapted to meet various processing requirements.
This plastic film granulating line is a new type of environmentally friendly plastic granulation equipment, which completely solves the problems of large water consumption, high power consumption, low output, and high production costs in the traditional granulation process, and doubles your investment profit.
Normal:
| Model | SJ45 | SJ65 | SJ90 | SJ100 | SJ120 |
| Output(kg/h) | 10-60 | 100-150 | 180-250 | 250-350 | 300-600 |
High output,low consumption:
| Model | SJ150 | SJ160 | SJ180 | SJ200 |
| Output(kg/h) | 400-700 | 600-1000 | 1500-2000 | 2000-3000 |
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content.
Water-ring Die-face cutting system
Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.
Vibration drying system
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption
Click to watch the complete HD video of the plastic film granulating line
