Plastic film pelletizing equipment adopts special screw design and different configurations, which is suitable for the production of PP, PE, PS, ABS, PA, PVC, PC, POM, EVA, LCP, PET, PMMA and other plastic recycling and color mixing granulation.
Plastic film pelletizing equipment adopts special screw design and different configurations, which is suitable for the production of PP, PE, PS, ABS, PA, PVC, PC, POM, EVA, LCP, PET, PMMA and other plastic recycling and color mixing granulation. The gearbox adopts a high-torque design to achieve noise-free and stable operation. The screw and barrel are specially hardened. Plastic film pelletizing machine has the characteristics of wear resistance and high output. The design of vacuum exhaust or ordinary exhaust port can exhaust water and exhaust gas during the production process, so that the output is more stable, the particles are stronger, and the product is guaranteed. Good quality.
1. All recycled materials can be produced after being sorted, crushed and cleaned without drying, drying or drying.
2. From raw material crushing, cleaning, feeding to pelletizing, all are automated.
3. Plastic film pelletizing machine adopts a split automatic power distribution system to ensure the normal operation of the motor.
4. The screw and barrel are made of imported high-strength carbon structural steel, which is durable.
5. Make full use of the high-pressure friction non-stop heating system to automatically heat production, avoid continuous heating, save electricity and energy.
6. The appearance of the plastic film pelletizer is beautiful and generous.
Normal:
| Model | SJ45 | SJ65 | SJ90 | SJ100 | SJ120 |
| Output(kg/h) | 10-60 | 100-150 | 180-250 | 250-350 | 300-600 |
High output,low consumption:
| Model | SJ150 | SJ160 | SJ180 | SJ200 |
| Output(kg/h) | 400-700 | 600-1000 | 1500-2000 | 2000-3000 |
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content.
Water-ring Die-face cutting system
Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.
Vibration drying system
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption
Click to watch the complete HD video of the plastic film pelletizing equipment
