Plastic film recycling washing line through the introduction, digestion and absorption of advanced technology concept at home and abroad, combined with their own technical experience, combined with the concept of environmental protection research and development into new plastic film recycling washing machine.
Plastic film recycling washing line through the introduction, digestion and absorption of advanced technology concept at home and abroad, combined with their own technical experience, combined with the concept of environmental protection research and development into new plastic film recycling washing machine.
1. Screw feed
The screw drive feeder is an auxiliary machine for plastic film recycling washing machine, which can directly and automatically transport powdery or granular plastic raw materials to the hopper.Screw drive feeding machine contact material made of stainless steel,conveying process of raw materials are completely free from pollution, do not bring into any foreign matter, can make the production process to achieve fully closed automation.
2. Friction cleaning machine
Mainly used for plastic film washing line, when recycled material, because the material will stick with dirt (such as sand and dust, etc.), need to use friction cleaner for cleaning materials, cleaning process is typically through a friction washer material movement, make the friction material and sieve, so that the dirt off the material.
3. Rinse separator
The tension of the filter belt is realized by inflating the air cylinder, so that the whole filter belt maintains a constant
tension.At the same time, it will not cause the change of tension due to the change of feeding quantity, so it is convenient to operate and manage.The filter press is equipped with an air pressure control system which automatically detects the position of the filter belt on the press roller and automatically corrects the deviation.
4. Crushing machine
This crushing machine is plastic film recycling machine, suitable for engineering plastics waste, defective injection sprue crushing granulation. Adopt sound insulation device, so the noise is small. The moving knife adopts removable blade, which can be removed separately after being blunt.
| Plastic Film Recycling Washing Line (for reference only, can be customized) | ||||
| Capacity(kg/h) | Total Power(kw) | Area Required(㎡） | Labour Required | Water Consumption(m³/h) |
| 300 | 210 | 240 | 3-4 | 1.5 |
| 500 | 340 | 360 | 4-5 | 3 |
| 1000 | 550 | 450 | 5-6 | 4.5 |
| 1500 | 800 | 520 | 5-6 | 6 |
Belt Conveyor
Belt conveyor is as a standard feeding device for plastic film, raffia, filament, woven bag, nonwoven fabric, etc.
Crusher
To crush material into small sizes. With water to clean material and cool blades during crushing.
Floating Washer
Make remaining label, caps and other impurity float and separate from PET flakes. With washing function for PET flakes.
Dewatering Machine
Drying materials by centrifugal force
Plastic Squeeze Dryer
Through plastic squeeze dryer, water and volume of the materials can be squeezed to increase the quality of the pellets and the efficiency of the extruders.
The moisture after squeeze dryer will be lowered down to 1-3%
Click to watch the complete HD video of the plastic film recycling washing line
