Plastic granules making machine has the advantage of simple process, high output, stable operation, low cost, high bearing capacity, long operating life and is easy to clean and maintain.
Plastic granules making machine has the advantage of simple process, high output, stable operation, low cost, high bearing capacity, long operating life and is easy to clean and maintain. Plastic granules making line assort with related auxiliary equipments (including die head) can produce granules. Plastic granules making line is widely used in various PE HDPE LDPE LLDPE films.
Purui Machinery in order to better give you professional answers, please describe plastic granules making line technical parameters requirements (such as: processing materials, output size, capacity, etc.) and attach your contact information (such as phone number, e-mail, facebook, whatsapp, etc.)
1. plastic granules machine equipped with double vacuum pump, viscosity loss is almost zero.
2. Plastic granules machine adopts internally generated surplus heat for linear crystallized avoiding overheating delay.
3. The screw and barrel are made of imported high-strength and high-quality carbon structural steel, which is durable.
4. Plastic granules making line apply water-ring hot-cutting, granules are uniform and beautiful.
5. Plastic granules making line with special venting equipment and can effectively wipe off the water content and get high output.
Plastic film→belt conveyor→compactor→mother extruder →hydraulic screen changer →baby extruder→hydraulic screen changer →pelletizing system →air transmission →silo storage
Normal:
| Model | ML85 | ML100 | ML130 | ML160 | ML160-Ⅱ |
| Output(kg/h) | 120-200 | 200-400 | 400-650 | 600-1000 | 800-1200 |
High output, low consumption:
| Model | ML85B | ML100B | ML130B | ML160B | ML180B |
| Output(kg/h) | 200-350 | 400-550 | 600-800 | 800-1200 | 1000-1500 |
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content
Water-ring Die-face cutting system
Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.
Vibration drying system
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption
Click to watch the complete HD video of the plastic granules making machine
