Plastic recycling and modification integrated granulation machine is mainly used for the recycling and modification of materials, single screw extruder + twin screw extruder two-in-one integrated design.
Plastic recycling and modification integrated granulation machine is mainly used for the recycling and modification of materials, single screw extruder + twin screw extruder two-in-one integrated design, Single screw extrusion design for sufficient melting and filtration of materials, come into the twin screw extrusion system for modification and filling, to achieve one-stop modification of recycled materials, so that recycled granules are more widely used.
1. Filling modification: CaCo3, talcum powder, BaSo4, iO2, ceramic powder, wood flour/plant fiber, othr inorganic filler.
2. Reinforce modification: short glass fiber, long glass fiber, carbon fiber, other whisker.
3. Preparation of master batch: Carbon black master-batch, color master batch, flame-retardant master-batch, degradation master-batch, other special functions master-batch.
4. Blending modification: thermoplastic material/elastomer, polymer alloys.
5. Cable material: PVC cable material, Zero halogen cable material, PE TR-XLPE, NDH, PE cross-linking cable material,special cable material.
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Single Screw Extruder
Single screw extrusion design for sufficient melting and filtration of materials.
Twin Screw Extruder
Come into the twin screw extrusion system for modification and filling, to achieve one-stop modification of recycled materials.
Water-ring Die-face cutting system
Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.
Vibration drying system
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption.
Click to watch the complete HD video of the plastic granulation line
