PP PE HDPE granulation line is mainly used for processing rigid flakes, crushed flakes, regrind flakes, hollow container, buckets etc.
PP PE HDPE granulation line is mainly used for processing rigid flakes, crushed flakes, regrind flakes, hollow container, buckets etc. The granulation line has the characteristics of good heat resistance, low moisture absorption, good chemical resistance, good weather resistance,high dielectric strength, good electrical properties, high dielectric strength and dimensional stability.
In order to recycle waste plastic, the plastic need to be washed, dried then melted, plasticized, extruded into strips, cooled by cooling system, and cut into granules by granulator. These granules are further processed into various plastics products by blowing, injection and calendering. The granulation line combines quantitative feeding, high efficiency extruder,different types of filter and different types of pelletizer by modular design.
1. The manufactured plastic granules are even, dense and beautiful.
2. The molding and blend effect of granulation line is uniform in this unit, and structure is tight.
3. The granulation machine adopt wind sending & gathering and vibration separate type cooling system which has high automation degree and productionefficiency.
Normal:
| Model | SJ45 | SJ65 | SJ90 | SJ100 | SJ120 |
| Output(kg/h) | 10-60 | 100-150 | 180-250 | 250-350 | 300-600 |
High output,low consumption:
| Model | SJ150 | SJ160 | SJ180 | SJ200 |
| Output(kg/h) | 400-700 | 600-1000 | 1500-2000 | 2000-3000 |
Note: Plastic recycling machines are customized product, any changes in material and motor configuration will affect the output capacity data. Please consult our sales quotation for guidance.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content
Water-ring Die-face cutting system
Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.
Vibration drying system
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption
