This squeezed film pelletizing line is used to wet plastic squeezer/squeezing dewatering pelletizing. This squeezed film pelletizing machine is suitable for all type pe pp hdpe ldpe lldpe film/bags.
This squeezed film pelletizing line is used to wet plastic squeezer/squeezing dewatering pelletizing. This squeezed film pelletizing machine is suitable for all type pe pp hdpe ldpe lldpe film/bags. Output can amount to 300~1000kg/hr per hour and the degradation of the pellets will be highly decreased.
Conveying feeding→metal detector → parallel twin screw extruder → bipolar vacuum exhaust system → hydralic screen exchanger → material outing mould → water tank → drying system → cutting granulating unit → storage hopper
1. Through dedicated screw design, washed materials can be squeezed to dehydrate water of films or fluffy stuff.
2. The recycled materials you feed are squeezed to become flakes or lumps.The moisture they contain will be lowered down to 3-5%. After being squeezed, these lumps or flakes with much lower moisture and higher density can be directly fed into squeezed film pelletizing machine.
3. The quality and validity of the pellets and the efficiency of the squeezed film pelletizing machine will be improved with the increased capacity.
Normal:
| Model | SJ45 | SJ65 | SJ90 | SJ100 | SJ120 |
| Output(kg/h) | 10-60 | 100-150 | 180-250 | 250-350 | 300-600 |
High output,low consumption:
| Model | SJ150 | SJ160 | SJ180 | SJ200 |
| Output(kg/h) | 400-700 | 600-1000 | 1500-2000 | 2000-3000 |
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Compactor / Agglomerator
The rotatory blades of compactor will cut up incoming scraps. Frictional heating which caused by high speed rotatory blades will heat and let scraps shrinking just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushes, dries and compacts the material which enables a fast and stable feeding from the compactor directly into the extruder.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content.
Water-ring Die-face cutting system
Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.
Vibration drying system
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption
Click to watch the complete HD video of the squeezed film pelletizing line
