This waste fabrics granulating line is one stage plastic regenerative pelletizer, which is suitable for many kinds of waste fabrics recycling and making pellet, such as PP non-woven, polyester non woven, non woven waste fabrics, melt blowing scrap and etc.
This waste fabrics granulating line is one stage plastic regenerative pelletizer, which is suitable for many kinds of waste fabrics recycling and making pellet, such as PP non-woven, polyester non woven, non woven waste fabrics, melt blowing scrap and etc.
Conveying feeding→ Metal detector →Film Agglomerator /Compactor →Degassing single screw extruder →Hydraulic filer exchanger→ Mould head →water ring cutting →Dewatering machine→ Air dryer Blowing system→ Storage hoper→ Finished product packing.
1. Waste fabrics granulating machine: crushing and compress waste fabrics, and feed compressed fabrics into extruder forced, to make the production capacity high and stable.
2. Extruding system: plasticizing material and exhausting gas.
3. High speed Net exchanging system and Die-head: filter material impurity, to make waste fabrics granulating machine more stable.
4. Water tank: cooling pellets.
5. Dewater machine: make pellets dry.
6. Vibration sieve: remove bad pellet and keep good pellet.
7. Air Blower: convey good pellets into silo.
8: Storage silo: keep pellet.
Normal:
| Model | SJ45 | SJ65 | SJ90 | SJ100 | SJ120 |
| Output(kg/h) | 10-60 | 100-150 | 180-250 | 250-350 | 300-600 |
High output,low consumption:
| Model | SJ150 | SJ160 | SJ180 | SJ200 |
| Output(kg/h) | 400-700 | 600-1000 | 1500-2000 | 2000-3000 |
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content.
Noodle Cutter Strand Type Cutting System
The length of the sink is 4 meters, which can be adjusted up and down, and the stainless steel pipe is designed to change water.
The sink is made of 2mm thick stainless steel plate.
Click to watch the complete HD video of the waste fabrics granulating line
