Water ring plastic granulator machine is used in plastic materials: PP, HDPE, LDPE, LLDPE etc.
Water ring plastic granulator machine is used in plastic materials: PP, HDPE, LDPE, LLDPE etc. The advantage of plastic granulator: greatly increase output, continuous production, flexible granulating style, finished product particle plasticizing better, no pores. Plastic granulator use domestic well-known brand, quality have assurance, equipment with long life and good performance.
Conveying feeding→metal detector → parallel twin screw extruder → bipolar vacuum exhaust system → hydralic screen exchanger → material outing mould → water tank → drying system → cutting granulating unit → storage hopper
1.The blender is used to mix and heat wet plastics and additives.
2.The self-designed frequency feeder can separate magnetic impurities in the plastic.
3.Different feeders are designed for the characteristics of plastics, which can better protect the screw and feed evenly.
4.The second plasticization can better improve the quality and output of plastic granulator machine.
5.The pellets cutting machine with frequency(Siemens Motor,very low noise).
Normal:
Model | SJ45 | SJ65 | SJ90 | SJ100 | SJ120 |
Output(kg/h) | 10-60 | 100-150 | 180-250 | 250-350 | 300-600 |
High output,low consumption:
Model | SJ150 | SJ160 | SJ180 | SJ200 |
Output(kg/h) | 400-700 | 600-1000 | 1500-2000 | 2000-3000 |
Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Compactor / Agglomerator
The rotatory blades of compactor will cut up incoming scraps. Frictional heating which caused by high speed rotatory blades will heat and let scraps shrinking just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushes, dries and compacts the material which enables a fast and stable feeding from the compactor directly into the extruder.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content
Water-ring Die-face cutting system
Water-ring die-face/Strand cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.
Vibration drying system
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption
Click to watch the complete HD video of the water ring plastic granulator machine